3D Printing a Cord Wall Pass-through

Instead of using traditional square-holed wall pass-through boxes, we came up with a minimal way to pass cords through walls with 3D printing. Check out the video and get the download below

We made a simple wall cord pass-through. I don't recommend using this to pass anything from outside to inside 😉.

• Two Internal Diameter Options: 1.05" or 1.25"
• Minimum Wall Thickness: 3.6"
• Maximum Wall Thickness: 5.4"
• Higbee start threads

Supplies

Includes Affiliate Links

• White PETG
• Hole Saws
• 1.5" Hole Saw - for 1.05" ID version
• 1.75" Hole Saw -  for 1.25" ID version
• Adjustable (like I use in video that might not go small enough)

 

Print Settings

• Used PETG but PLA would work likely too.
• Layer Height:  0.16mm
• Walls: 3
• Top / Bottom Surface:  Concentric
• Infill:  15%, Gyroid
• Slow Down for Overhangs:  ✔ 
• No Brim or Support Needed
• Slower Outer and Inner Walls will make for a better thread (100 mm/s on X1)

PDX CNC Products

DO US A FAVOR — SUBSCRIBE TO OUR YOUTUBE?

 

Click to subscribe ⤴

 

If this helped you out, consider Buying Me a Coffee: